How to Fix Error Code B200 for Canon Pixma MG7160 Printer? [Solution]
Error Code B200 Canon Pixma MG7160
Each consumer of Canon inkjet printer, can have the chance to search out the B200 Error Code on the printer. The reason for error within the Canon Inkjet printer could be very variatifly, however the primary of it's Error Code B200. The B200 error possibly can level to a number of various things, however principally it’s an issue with the print head overheating. Different that, the issues normally have relation with waste ink tank full, Waste ink pad full and different a part of the printhead.
For the Error Code B200 on Canon Pixma MG7160, Canon technicians recommends to customers some generic fixes for this drawback. This recomendation like flip OFF of the printer and switch ON it. However we discovered some extra answer sturdy fixes that contain working with the printer heads.
Error B200 Causes :
Why the printer is error and What Units Off this Printer Error?
Why the printer is error and What Units Off this Printer Error?
Amongst of the causes:
The error on the printer occurred when a papers has been printed and the ink fully empty, in situation if a cartridge is totally empty.
In accordance with Canon, it even be resulting from international cartridges, with which the printer can't cope. Cleansing and checking the printheads will assist of this error. However you must bear in mind, it answer provided that the printer is not assured, because the guarantee could also be void, as a result of you might injury the printhead.
One other of the causes:
The error on the printer occurred when a papers has been printed and the ink fully empty, in situation if a cartridge is totally empty.
In accordance with Canon, it even be resulting from international cartridges, with which the printer can't cope. Cleansing and checking the printheads will assist of this error. However you must bear in mind, it answer provided that the printer is not assured, because the guarantee could also be void, as a result of you might injury the printhead.
One other of the causes:
The opposite explanation for this error normally happens when totally different formulation of ink have been utilized by the printer. This error some occasions happens while you change or refill an OEM cartridge with not legimate product and this product in typically with low cost worth provides which have questionable toner high quality and/or construct high quality.
Troubleshooting Information :
Easy methods to Repair the printer with Error B200?
Easy methods to Repair the printer with Error B200?
There are two part to unravel this error; {hardware} technical part and software program technical part of the printer.
Part 1: {Hardware} Technical Part
On this part, we now have 5 answer for resolve the printer error code B200. This options come from quite a few occasions expertise of printer technician after face identical error by repeatedly.
Try the fixes and answer of this drawback, we'll guides step-by-step for clearing this drawback. Choose one of many 5 obtainable options under:
Answer 1:
- Flip OFF the printer.
- Unplug the printer from the ability supply.
- Open the printer cowl then reveal the ink cartridges.
- Take away the printhead from the printer be rigorously.
- Clear the Printhead together with the Ink Cartridges.
- Clear the contact pads within the printer with a contact cleaner or pencil eraser.
- Reinstall the printhead once more.
- Reinstall the ink cartridges thereafter earlier than powering up the printer.
- Run the “Auto Head Alignment” for testing the printer.
Answer 2:
- Flip OFF Energy of the Printer.
- Open the print head bay (as if you had been about to alter inks).
- Flip ON energy.
- Look ahead to print carriage to begin transferring to the left and let it go previous half manner.
- Earlier than print carriage reaches left hand facet (however after going midway throughout) shut the duvet.
- Turned on the Printer once more.
Answer 3:
- Open printer.
- Take away ink cartridges.
- Un-install printhead.
- Clear again of the printhead (digital pins) with alcohol (isopropylen cleansing alcohol if doable). Make sure that the pins are 100% clear.
- Flip off the printer (don't shut it!) by plugging-off energy twine (don't use energy button).
- Clear digital pins in printer (the pleace the place you put in printhead). Make sure that its 100% clear.
- RE set up printhead, then set up ink cartridges.
- Plug in energy twine.
- Flip printer ON normaly.
- Verify if printer is working normaly (no errors).
Answer 4:
- Flip OFF the printer.
- Disconnect the printer from the ability supply.
- Open cowl of the printer and take away the colour cartridges.
- Take away the sled wherein the cartridges had been beforehand positioned.
- clear the cartridges with water be rigorously. For max outcomes, clear it use isopropanol (there within the pharmacy), in order that the printhead can't clog with lime.
- Ensure that the golden contacts should not moist, in any other case you possibly can injury the print head.
- Dry all the things be rigorously, make certain no residual water will get into the printer.
- Reinstall cartridges and carriages within the first place.
- Flip ON the printer once more.
If the message of "Error B200" seems once more, the printer should be switched off once more. And The flap should be opened earlier than switching on. When switching ON once more with the flip open, the printer then performs a self-test: Then the error mustn't happen to repeat extra typically, that it really works and the issue solved.
Answer 5:
- Unplug the ability cable.
- Open the printer.
- Push the entire print head mechanic to the middle.
- Whereas the printer nonetheless open, plug the ability and switch it ON.
- When the printhead nonetheless transferring and goes to the very LEFT, shut the duvet.
- Wait till its boot up.
You probably have attempting and following step-by-step of the primary part information and the error nonetheless pops up in your printer, proceed to the second part under.
Part 2: Software program Technical Part
On this part, you will want to have an web connection and administrator entry on a pc. For this part, observe the step-by-step under:
- Replace the printer drivers in addition to the Canon IJ Printer Utility software program.
- Click on “Begin” out of your Home windows desktop and click on “Units and Printers.”
- Proper-click the Canon MPxxx (in accordance your Canon code Model) and click on “Properties.”
- Choose the “Upkeep” tab and click on “Deep Cleansing”.
- Run a Nozzle Verify from the Upkeep tab when the deep cleansing is completed.
